4'' Pro Smoke Pit Thermometer
The Uk's Biggest BBQ Smoker Thermometer
NEW STOCK APRIL MID-END - SIGN UP FOR STOCK UPDATES
- Heavy Duty Professional Dual Scale Stainless Steel Construction
- Easy to read 4-inch dual scale Dial (50 to 550 F)
- Fine Tuning Calibration Adjustment
- 1/2'' NPT Thread
- 3'' Stem and 4'' Dial - Largest in the UK
- Fits most offset smokers without modification
- All Webers with a minor hole modification
- Perfect for Ugly Drum Smokers (UDS)
BBQ Thermometers don't get any better than this, it's a large 4-inch diameter, dual scale reader! Always knowing where your BBQ temperatures are is an essential part of being a pit boss.
Great if you're fed up with the inaccurate BBQ thermometers, upgrading an existing smoker or building an ugly drum smoker this is the one.
The 1/2'' NPT thread ensures it will screw right into existing offset smokers including the Oklahoma Joe Highland
It also has an extra calibration screw in the rear where you can fine-tune it to a digital probe sat in the kettle.
If you have a Weber bbq we recommend you use a ''uni bit'' to bore the existing hole to 1/2'', this tool is also great for making a new hole if this is an additional thermometer on your pit.
The lens assembly is hermetically sealed to prevent fogging and moisture from entering the dial, this really is the Rolls Royce of pit thermometers
If you think a 3'' stem may be too big for your smoker when full, please see the ''shim kit'', this will take the stem down to 1.5''
These thermometers are calibrated to an exact temperature, so they will not take into account grate level temperature which is normally slightly lower.
If you wish to recalibrate these to read grill temperature, simply turn the adjustment screw on the back to your desired setting.
Thermometer ''Shim kits'' available to reduce the length of the Thermometer stem.
Really pleased with this larger and more accurate thermometer as an upgrade to the stock WSM one. Looks great and makes the need for a grill level temp probe much less vital. Beware the thread size though. Description says 1/2" NPT thread but the one I received was more like 7/8" so needed a bigger unibit than I was envisaging. Again, Oliver really helpful with fitting advice.
I had 2 of these thermometers fitted to a custom offset I had built , they are incredibly solid ,well built bits of kit that will clearly last for years , I have compared them to both of my digital thermometer I have and they have always been spot on with those , well worth a few extra quid , you get what you pay for here .
I wanted to upgrade my offset smoker so ordered one of these. When I took it out of the box I was immediately shocked by the size of the face of it but also the weight of the gauge. It is extremely well put together and seems to be a quality product, I might have to order another one and really pimp out my smoker!!